Design

Reorganize Makefile for each repo

Previously, SD-RAN Makefile imported the Makefile in onos/build-tools.

Now, we are trying to decouple it from the tool repo.

Most of repos have Makefile organized like below:

Essential Makefile targets in repos which should tag code, publish and push Docker images
- build - build the binaries and run all validation
- test - run the unit tests and source code validation
- docker-build - build all Docker images in the repo
- docker-push - push all Docker images to the registry
- lint - examine Go source code and reports coding problems
- license - run license check
- check-version - check version if it is valid and duplicated
- clean - remove all build artifacts
- help - show help message
Essential Makefile targets in repos which should tag code only
- build - build the binaries and run all validation
- test - run the unit tests and source code validation
- lint - examine Go source code and reports coding problems
- license - run license check
- check-version - check version if it is valid and duplicated
- clean - remove all build artifacts
- help - show help message
Essential Makefile targets in repos which should tag code, publish and push Helm charts
- lint - examine Go source code and reports coding problems
- license - run license check
- check-version - check version if it is valid and duplicated
- clean - remove all build artifacts
- help - show help message
- deps - run helm dependency update for all umbrella charts

Create a PR

Run two workflows in parallel
- Workflow 1: Code scanning
  - Version check job: validate version in VERSION file with Makefile target - make check-version
  - Lint job: check linters with Makefile target - make lint
  - License job: check license with Makefile target - make license
  - Fossa check job: run Fossa check with fossa-action
- Workflow 2: Test and build
  - Build job: build code with Makefile target - make build
  - Test job: run tests with Makefile target - make test

Merge a PR

Run three workflows in parallel
- Workflow 1: Code scanning
  - Version check job: validate version in VERSION file with Makefile target - make check-version
  - Lint job: check linters with Makefile target - make lint
  - License job: check license with Makefile target - make license
  - Fossa check job: run Fossa check with fossa-action
- Workflow 2: Test and build
  - Build job: build code with Makefile target - make build
  - Test job: run tests with Makefile target - make test
- Workflow 3: Publish image/chart and tag/release code
  - Version check job: validate version again right before publish image/chart and tag/release code
  - Tag version job: if version is valid and not including -dev suffix, create a tag with version in VERSION file
  - Publish image job:
    - Step 1: build and push Docker image with tag latest if version is valid
    - Step 2: build and push Docker image with a specific version in VERSION file, if version is valid and not including -dev suffix
  - Bump-up version job: if version is valid and not including -dev suffix, update VERSION file to increase the patch version and add -dev suffix and then create a PR for this VERSION file change

How to check version?

Sample: https://raw.githubusercontent.com/onosproject/onos-pci/master/build/bin/version_check.sh

Repository configuration

Github repo settings > General tab > Pull Requests section
Github repo settings > branches > main rule

Target repositories

Type	Repository	Code Scan	Test and Build	Release	Publish	Done?	Note
xApp	onos-pci	Y	Y	Y	Y (Docker image)	Y
	onos-kpimon	Y	Y	Y	Y (Docker image)	Y
	onos-mho	Y	Y	Y	Y (Docker image)	Y
	onos-mlb	Y	Y	Y	Y (Docker image)	Y
	onos-rsm	Y	Y	Y	Y (Docker image)	Y
	rimedo-ts	Y	Y	Y	Y (Docker image)	Y
RAN	openairinterface5g	Y	Y	Y	Y (Docker image)	Y
	ran-simulator	Y	Y	Y	Y (Docker image)	Y
	scalable-ran-simulator	N/A	N/A	N/A	N/A	N/A	Code not merged; still in local
Core	onos-e2t	Y	Y	Y	Y (Docker image)	Y
	onos-a1t	Y	Y	Y	Y (Docker image)	Y
	onos-o1t	Y	Y	Y	Y (Docker image)	Y
	onos-exporter	Y	Y	Y	Y (Docker image)	Y
	onos-uenib	Y	Y	Y	Y (Docker image)	Y
	onos-cli	Y	Y	Y	Y (Docker image)	Y
	onos-config	Y	Y	Y	Y (Docker image)		Test failed sometimes randomly; need to investigate later - temporally disabled two of test cases; --- FAIL: TestProposalStore (5.08s) FAIL FAIL github.com/onosproject/onos-config/pkg/store/v2/proposal 5.102s No issue at this time.
	onos-topo	Y	Y	Y	Y (Docker image)	Y	Test failed due to hardcoded path link - temporally disabled one of test cases; need to fix it later 2024-06-30T02:45:37.484Z FATAL github.com/onosproject/onos-topo/pkg/tools/topo-generator/generator generator/writer.go:31 open /home/runner/work/onos-topo/pkg/tools/topo-generator/generator/templates/template.yaml: no such file or directory github.com/onosproject/onos-topo/pkg/tools/topo-generator/generator.WriteFile /home/runner/work/onos-topo/onos-topo/pkg/tools/topo-generator/generator/writer.go:31 github.com/onosproject/onos-topo/pkg/tools/topo-generator/generator.TestWriter /home/runner/work/onos-topo/onos-topo/pkg/tools/topo-generator/generator/writer_test.go:20 testing.tRunner /opt/hostedtoolcache/go/1.19.13/x64/src/testing/testing.go:1446 FAIL github.com/onosproject/onos-topo/pkg/tools/topo-generator/generator 0.071s No issue at this time.
Lib	onos-a1-dm	Y	Y	Y	N/A	Y
	onos-api	Y	Y	Y	N/A	Y	auto-generated code by proto causes linters - disabled some code No issue at this time.
	onos-e2-sm	Y	Y	Y	Y (Docker image)	Y
	onos-lib-go	Y	Y	Y	N/A	Y
	onos-ric-sdk-go	Y	Y	Y	N/A	Y
	rrm-son-lib	Y	Y	Y	N/A	Y
Chart	sdran-helm-charts	Y	Y	Y	Y (Helm charts)	Y	Done - need more tests
	onos-helm-charts	Y	Y	Y	Y (Helm charts)	Y	Done - need more tests
Tool	sdran-in-a-box	N/A	N/A	N/A	N/A	N/A	CI unnecessary
Misc	onos-operator	Y	Y	Y	Y (Docker image)	Y
	onos-proxy	Y	Y	Y	Y (Docker image)	Y

Home

[Release 1.5] GitHub Action Migration for SD-RAN

Design

Reorganize Makefile for each repo

Create a PR

Merge a PR

How to check version?

Repository configuration

Target repositories

Related content